Home Wash (Domestic Laundry) Guidelines
A colored clothing wash program without pre-wash should be used. Follow below recommendation could maintain the durability of retro-reflectivity to its maximum lifespan.
Recommendation:
- Detergent: Brand powdered household detergents should be used.
- Refer to the detergent manufacturer’s recommendations for dosage in areas of high-water hardness and for various degrees of garment soiling.
- Wash temperature range: 15°C to 30°C
- Some items could be extended to be home-washed with a wider range of washing temperature than above.
- Some items could be applicable to wash temperature ranging from 0°C to 90°C for those garments requiring harsher cleaning. Read the physical performance of each reflective tape for the details.
- Max. Wash time at highest wash temperature: 12 minutes
- Max. Program time: 30 minutes
- Use of temperatures lower than 30°C will increase the lifetime of the reflective material.
- Actual lifetime will be dependent upon the detergent system and list dosage level.
- Load factor higher than 65% might lead to enhanced abrasion of the retro-reflective material
Drying Conditions
Tumble Dry: Tumble drying should be performed in a commercially available household dryer
Air Drying: Line drying is recommended where possible.
Hang-Up Drying: on line or rack
Tumble drying and tunnel/air drying are both recommended and applicable to this series of retro-reflective tape. Follow below recommendation will prolong the durability of product.
- Using the medium dry setting.
- Exhaust temperature should not exceed 90°C.
- Do not over-dry.
Dry Cleaning Conditions
Dry cleaning should not be applied to V-REFLEXTM Reflective Material - Low Temperature Heat Transfer Reflective Film at any condition.
We produce other heat transfer reflective film which could be cleaned by dry-cleaning.
For the products that could be applied with dry cleaning, cleaning process should be based on a pre- and main-bath only.
For P it is recommended to only use pure perchloroethylene.
Adjust load and solvent level to give a moderate mechanical action.
- Max. solvent temperature: 30°C
- Recommended drying temperature: 48°C
