Retro-reflective Performance
V-REFLEXTM Reflective Material - Silver (Silver-Gray) Heat Transfer Retro-Reflective Film/Tape exceeds the minimum reflectivity requirements of EN ISO 20471, ANSI/ISEA 107 Level 2, when tested at e = 0° or e = 90° in accordance with the procedures stated on standards. Minimum coefficients of retro-reflection required by standards are shown as below table.
|
Observation Angle |
Entrance Angle (β1, β2=0) |
|||
|
5° |
20° |
30° |
40° |
|
|
0,20°(12') |
330 |
290 |
180 |
65 |
|
0,33°(20') |
250 |
200 |
170 |
60 |
|
1,00°(1°) |
25 |
15 |
12 |
10 |
|
1,50°(1°30') |
10 |
7 |
5 |
4 |
Measured on new product at +5.0° entrance and 0.2° observation angles, V-REFLEXTM Reflective Material - Silver (Silver-Gray) Heat Transfer Retro-Reflective Film/Tape has retro reflective performance as below table.
|
Initial Average RA |
Minimum RA |
|
500 |
330 |